Description: You are bidding on the Excel compact gas meter .
There is no other gas meter available in the american market that is as compact as the Excel Gas Meter.
Measures 8.2" x 4.7"x 6.6".
Weighs only 5 lbs
SPEC SHEET : http://www.excelamerica.com/medidores_eng.htm
This auction is for one Excel G1.6 Gas Meter. This is a positive displacement diaphragm type gas meter rated for 90 SCFH (Standard Cubic Feet per Hour) of AIR . This is equivalent to 112 CFH of Natural Gas, capable of measuring Natural Gas Burners and Appliances up to 112,000 BTU's or or Propane gas, capable of measuring LPG Gas Burners and Appliances up to 185,000 BTU's
Applications: It is the same type of meter that a utility uses to bill residential and small commercial customers.
It is ideal for sub-metering space that is leased out, doing energy monitoring on specific pieces of equipment or for lab usage to monitor totalized flow of a process.
Gas is measured in cubic meters with a 4 digit black odometer index for cubic meters and a 3 digit red odometer index for liters .
The Excel Gas Meter odometer index can be read to 1 liter accuracy (equivalent to 61 cubic inches). Odometer index is much clearer to read than the old fashioned dial type .
It is customarily used on natural gas, propane or air, but can also be used on other dry gases such as dry CO2, Nitrogen or Propane/Air. It can measure all types of gases, email us metering@excelamerica.com for technical support.
NATURAL GAS: This is equivalent to 112 CFH of Natural Gas, capable of measuring Natural Gas Burners and Appliances up to 112,000 BTU's
LPG or PROPANE GAS: This is equivalent to 73 CFH of LPG or Propane gas, capable of measuring LPG Gas Burners and Appliances up to 185,000 BTU's
It can be installed in gas lines up to 1.4 PSIG (38" WC) of pressure.
A typical Natural gas Line is 7" WC.
A typical LPG gas Line is 11" WC.
There are 1000 liters in m3, that is why the red part of the odometer goes from 000 to 999 liters and resets back to 000 , the black part of the odometer starts with 1m3 up to 10,000 m3.
For Natural Gas Users:
One m3 is equal to 35.3 cubic feet of gas
One liter (red part of the odometer) is equal to 0.0353 cubic feet.
A therm is 100,000 BTU. = 100 cu feet of Nat Gas = 2.830 m3
If the gas meter started the reading at 0000.000; one therm in the gas meter is 0002.830.
For example if your meter begins the billing period at 10.000 on the odometer and ends at 12.830 you will be billed one THERM
MORE TECH TRIVIA
The average heat value of natural gas is 1000 BTU per cubic foot. A BTU (British Thermal Unit) is enough heat to heat one pound of water one degree (F). Natural gas is sold to the customer in units of 100 cubic feet (therm) or in a unit called MCF.
A therm represents approx. 100,000 BTU of heating power, enough to heat a normal home for about 2hours during colder weather. MCF is ten therms, or 1 million BTU's.
Natural Gas is delivered to the customer at a very low pressure, usually less than 1/2 PSI. The pressure is expressed in Water Column (WC), where 28" WC = 1 PSI.
FOR LPG USERS
1 gallon of Liquid Propane Gas (LPG) converts to 36.39 cubic feet of Propane Gas , so in your gas meter , one cubic meter equals roughly to one gallon of propane.
Accesories Included: It comes with 1 / 2" NPT Male connectors (swivels, nuts and gaskets) for installation on both sides.
You need a 1/2" female NPT side of a fitting to make the connections to the gas meter on each 1/ 2" NPT male connector.
Meets International Standard OIML R31 (International Organization of legal Metrology). Please email us at standards@excelamerica.com and we will send you a PDF document with complete OIML R31 standard and specs met by this gas meter.
Applications: It is the same type of meter that a utility uses to bill residential and small commercial customers. It is ideal for sub-metering space that is leased out, doing energy monitoring on specific pieces of equipment or for lab usage to monitor totalized flow of a process. Gas is measured in cubic meters with a 4 digit black odometer index for cubic meters and a 3 digit red odometer index for liters .
The Excel Gas Meter odometer index can be read to 1 liter accuracy ( equivalent to 61 cubic inches.) Odometer index is much clearer to read than the old fashioned dial type .
It is customarily used on natural gas, propane or air, but can also be used on other dry gases such as Dry CO2, Nitrogen or Propane/Air. It can measure all types of gases , email us metering@excelamerica.com for technical support.
Dimensions , Weight and Flow Direction:
Measures 8.2" x 4.7"x 6.6". Weighs only 5 lbs
Gas Flow direction is from left to right . --------------->
Features: The shell is with aluminum alloy with advanced powder coating surface treatment which makes it possible to install outdoors or indoors.
This amazingly compact gas meter designed for residential or lab use and it can be connected to the existing gas network via 1/2" NPT connectors . It is so sensitive it can measure the gas consumed by a lighted pilot.
Infinite applications can be found for the extraordinary Excel gas meter .
This revolutionary compact design, Exquisitely-made has high sensitivity and is equipped with Anti reverse mechanism.
Packing: The Excel Compact gas meter comes in a lavishly protected styrofoam box, everything is included to hook it up to your gas line.
SPEC SHEET : http://www.excelamerica.com/medidores_eng.htm
Excel On Line Store
